LoRaWAN RF Transceiver EVK
WD-FLI6 EVK-1
WD-FLI6 EVK is added with sensors and necessary components based on the WD-FLI6 module, and provide streamlined test firmware to quickly assess the module efficiency.
The wireless connection protocol of the WD-FLIx module is LoRaWAN can connect to the network and transfer data in accordance with the specified LoRaWAN Region and the corresponding LoRaWAN Gateway. WD-FLIx EVK is added with sensors and necessary components based on the WD-FLI6 / WD-FLI7 module, and provide streamlined test firmware to quickly assess the module efficiency.
WD-FLI6 Module
Frequency Band: 868MHz
Dimension: 12(W)×18(L)×2.45(H) mm 27pins SMD
Antenna: Built-in Chip Antenna
Temperature Range: -40°C ~ +85°C
Supply Voltage: 3.3 V Type (1.8 V ~ 3.6 V)
TX Power: Transmitter max output power +20.5 dBm
RX Sensitivity: -148 dBm for LoRa(at 10.4 kHz, spreading factor 12)
Transmitter Current: 108mA @ Max output power in 868MHz type (50 Ω)
Sleep Current: Less than 2uA
Modulation: LoRa (Chirp Spectrum)
Protocol: LoRaWAN V1.03
LoRaWAN Region: EU868, IN865, RU864
Topology: Star
Bitrates: Up to 62.5K bps
WD-FLI6 EVK
Antenna: 868 MHz Chip ANTENNA
PCB dimension: 28.45×56.85 (mm)
Work temperature: -40°C ~ 85°C
Sensor: 1 thermometer / hygrometer
Buttons × 2
Interface feature: 1 set of Micro USB
Flexible power management: AA battery (alkaline battery)
Standard 2-Wires SWD debugging port
Support 17 GPIOs at most
1 set LPUART (low power) Application UART Port